Weidmuller Surge Arrestor Class III 3kA Imax 300V 1 Phase

Brand: Weidmuller

Product Code: 1351650000

Availability: 1 In stock


$131.37 inc. GST

$119.43 + DeliveryTo calculate delivery cost, add this item to your cart and enter your shipping address at Checkout. Shipping FAQ


Ask about this productAsk about this product

Weidmuller Final Circuit/Machine Surge Arrestor Class III 3kA Imax 300V 1 Phase - VPU IIIR 230V/6KV AC

Product Specifications

Dimensions and weights  
Width 18 mm
Width (inches) 0.709 inch
Height 102 mm
Height (inches) 4.016 inch
Depth 71.5 mm
Depth (inches) 2.815 inch
Net weight 77 g
Humidity 5 - 95% rel. humidity
Operating temperature, max. 70 °C
Operating temperature, min. -40 °C
Storage temperature, max. 70 °C
Storage temperature, min. -40 °C
Operating temperature -40 °C...70 °C
Storage temperature -40 °C...70 °C
Technical data signal line  
Rated current IN 16 A
Connection data remote alert  
Connection type Screw connection
Max. torque 0.5 Nm
Stripping length 5 mm
Cross-section for connected wire, solid core, min. 0.2 mm²
Cross-section for connected wire, solid core, max. 1.5 mm²
General data  
Colour orange
Design Installation housing; 1TE, Insta IP 20
Optical function display Green LED = OK, Red LED = arrester is defective, replace
Protection degree IP20
Rail TS 35
Segment Power distribution
UL 94 flammability rating V-0
Version with remote contact
Insulation coordination acc. to EN 50178  
Pollution severity 2
Surge voltage category II
Rated data IEC/EN  
Combined pulse UOC 6 kV
Discharge current, max. (8/20 µs) 3 kA
Fuse 16 A
Leakage current at Un 30 µA
Low voltage network Single-phase
Mains frequency at 250 Vmax 50...60Hz
Max. continuous voltage, Uc (AC) 300 V
Number of poles 1
PE conductor current IPE 30 µA
Protection level UP (typ.) ≤ 1200 V
Protection level Up at IN (L/N-PE) ≤ 1.8 kV
Rated current IN 16 A
Rated voltage (AC) 230 V
Requirements category acc. to IEC 61643-11 Type III
Requirements class, acc. to EN 61643-11 T3
Response time ≤ 100 ns
Short-circuit current rating ISCCR 1.5 kA
Signalling contact 250 V 10 A 1 NC
Temporary surge voltage (over-voltage) - TOV 438 V
Voltage type AC
Connection data  
Type of connection Screw connection
Stripping length, rated connection 7 mm
Tightening torque, min. 0.4 Nm
Tightening torque, max. 0.5 Nm
Clamping range, rated connection 2.5 mm²
Clamping range, min. 0.5 mm²
Clamping range, max. 2.5 mm²
Wire cross-section, solid, min. 0.13 mm²
Wire cross-section, solid, max. 2.5 mm²
Wire connection cross-section, finely stranded, min. 0.5 mm²
Wire connection cross section, finely stranded, max. 2.5 mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), min. 0.5 mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), max. 2.5 mm²
Connection cross-section, stranded, min. 0.5 mm²
Connection cross-section, stranded, max. 2.5 mm²
Approvals CE EAC OEVE
ROHS Conform