1000H x 1000W x 400D 316ss Electrical Enclosure with Fan, Vent and Hoo

1000H x 1000W x 400D 316ss Electrical Enclosure Assembly fitted with 1 x IP-V4200 Fan Filter 125m3/hr 250x250x107mm, 1 x IP-V4000 Filter Grille 250x250x38mm; 2 x IP-SSVH4737 475x375x75mm 316ss Vent Hoods

IP55 Electrical Enclosure - 316 Stainless Steel

IP Enclosures SS2 range consists of double door, wall-mounted grade 316 stainless steel electrical enclosures designed for extreme duty applications.

Features and Specifications

Protection: Complies with IP55 IK10, NEMA 4x (Independent accredited test laboratory).

Standard: IEC 62208, IEC/EN/AS60529, (UL 508A Optional).

Conforming and certified to IEC 62208 Empty enclosures for low voltage switch gear and control gear assemblies.
(Complying to new standard AS/NZ 61439 2016 Low voltage switch gear and control gear assemblies as empty enclosure in accordance to IEC 62208.)

Material:

Body: 1.5mm Grade 316/316L Stainless Steel
Door: 1.5mm Grade 316/316L Stainless Steel
Device Mounting Plate: 1.5mm Galvanised Steel Sheet
Seal: Polyurethane

Surface Finish:

0.4 micron Ra surface brushed finish

Enclosure Body:

The robust monoblock body is 1.5mm Grade 316/316L Stainless Steel. Precision automated manufacturing equipment ensures accuracy and consistent high quality. Flat face sealing surfaces increase seal life. Pre-fitted blind nutserts for mounting brackets and accessories removes the need for drilling. This retains the integrity of the IP rating. Integral device plate mounts and M6 earth stud are included.

Enclosure Double Doors:

The surface mounted doors are 1.5mm Grade 316/316L Stainless Steel and incorporates concealed removable hinges with captive pins. The doors are designed to eliminate the central mullion to improve accessibility into the enclosure. Doors are designed for a 110° opening. Each door contains integral cable management rail studs and M6 earth studs. The cable management rails are removable to provide more space for control components.

Enclosure Seal:

A high quality full perimeter seal provide excellent sealing over a long life. It is machine applied Polyurethane foamed in place (FIP).

Lock:

3 point locking system with key-lock swing handle.

Device Mounting Plate:

The device mounting plate is 1.5mm galvanised steel sheet. It is pressed to provide strength. It is pre-fitted into the enclosure as standard.

Filter Fan for Electrical Enclosure 125m3/h 250 x 250 x 107, 230V 50/60Hz

High quality Italian filter fan unit for electrical enclosures.

Vent Filter Grille for Electrical Enclosure  250 x 250 x 38

High quality Italian vent filter grille for electrical enclosures. Designed for easy front access maintenance for fast filter mat cleaning and replacement.