1000H x 700W x 400D 316ss Sloping Roof Electrical Enclosure Assembly fitted with 2 x IP-V3000 Filter Grilles 204x204x27mm
IP66 Sloping Roof Electrical Enclosure - 316 Stainless Steel
The SSSR range of Grade 316 Stainless Steel 30° Sloping Roof Enclosures are designed to house a variety of electrical switch and control equipment in extreme duty applications while preventing build-up of dust, debris and waste material.
Features and Specifications
Protection: Complies with IP66 IK10, NEMA 4x (Independent accredited test laboratory).
Electrical Enclosure Standard: IEC 62208, IEC/EN/AS60529, (UL508A Optional).
Conforming and certified to IEC 62208 Empty enclosures for low voltage switch gear and control gear assemblies.
(Complying to new standard AS/NZ 61439 2016 Low voltage switch gear and control gear assemblies as empty enclosure in accordance to IEC 62208.)
Body: 1.5mm Grade 316/316L Stainless Steel
Door: 1.5mm Grade 316/316L Stainless Steel
Device Mounting Plate: 1.5mm Galvanised Steel Sheet
0.4 micron Ra surface brushed finish
The robust monoblock body with 30° sloping roof is fabricated using 1.5mm Grade 316/316L Stainless Steel. Cutting, pressing and full continuous seam welding using precision automated manufacturing equipment to ensure accuracy and consistent high quality. Flat face sealing surfaces are provided to increase seal life. Pre-fitted blind nutserts are incorporated to accommodate mounts and accessory fasteners to eliminate drilling and retain IP rating. The roof consist of a 30° sloped roof design that protrudes past the seal, flush with the front of the door face. Integral device plate mounts and M6 earth stud is provided.
The surface mounted door is 1.5mm Grade 316/316L Stainless Steel and incorporates concealed removable hinges with captive pins. Doors are also designed for a 110° opening. Each door contains integral cable management rail studs and an M6 earth stud. The cable management rails are removable to provide more space for control components.
A high quality full perimeter seal provides excellent sealing over a long life. It is machine applied Polyurethane foamed in place (FIP).
8mm square drive quarter turn lock with key.
Device Mounting Plate:
The device mounting plate is galvanised steel sheet. It is pressed to provide strength and is pre-fitted into the enclosure.
Vent Filter Grille for Electrical Enclosure 204 x 204 x 37
High quality Italian vent filter grille for electrical enclosures. Designed for easy front access maintenance for fast filter mat cleaning and replacement.
|Air flow rate (free blow)||m³/h||€“|
|Flow rate with exit filter||m³/h||€“|
|Operating temperature||°C||€“ 10 / +70 (+14 / +158)|
|Filter mat (Eurovent)||€“||G3|
|Service life (at 40°C)||hr||€“|
|Material||€“||ABS UL94V-0 Color RAL7035|
|Gasket||€“||foam seal gasket|
|Weight (with packaging)||kg||0.32(0.42)|