1860H x 400W x 800D IP55 Floor Standing Electrical Cabinet with Vents

1860H x 400W x 800D IP55 Floor Standing Electrical Cabinet - Assembled. Fitted with IP-RV1 Roof Vent 400x350x120mm; IP-V5000 Filter Grille 325x325x42mm

IP55 Freestanding Electrical Cabinet - Powder-Coated Steel

IP Enclosures MF1S Range of IP55 free standing electrical cabinets are suitable for general industrial applications.

Features and Specifications

Protection: Complies with IP55 IK10. (Independent accredited test laboratory)

Standard: IEC 62208, IEC/EN/AS60529

Conforming and certified to IEC 62208 Empty enclosures for low voltage switchgear and controlgear assemblies.
(Complying to AS/NZ 61439 Low voltage switchgear and controlgear assemblies as empty enclosure in accordance to IEC 62208.)

Material:

Main Frame: 2.0mm Galvanised Steel W Profile System
Side, Rear and Roof Panels: 1.2mm Powder-Coated Galvanised Steel Sheet
Front Door: 2.0mm Powder-Coated Galvanised Steel Sheet
Mounting Plates: 2.0mm Galvanised Steel Sheet
Seal: EPDM

Enclosure Main Frame:

The robust modular main structure is fabricated using 2.0mm galvanised steel sheet W Profile system with 20mm hole pattern.

Enclosure Door:

The robust door is fabricated using 2.0mm powder-coated galvanised steel sheet and incorporates four concealed reversible hinges allowing left or right hand opening. The door is designed for a 135° opening. Each door contains integral cable management rails with 20mm hole pattern, M5 earth stud and provision for a document pocket.

Enclosure Side, Rear and Roof Panels:

Removable panels are fabricated using 1.2mm powder-coated galvanised steel sheet.

Enclosure Base:

Base is 100mm

Enclosure Door Seal:

High quality EPDM replaceable door seal

Enclosure Lock:

4 point locking system with key-lock swing handle.

Enclosure Device Mounting Plate:

The device mounting plate is fabricated using 2.0mm mm galvanised steel sheet, pressed to provide additional strength.

Earthing:

All panels are earthed to provide earthing continuity.

Surface Treatment:

UL approved epoxy polyester powder-coated with a textured finish. 80-120 micron average thickness.
Colour: RAL7035
Colour of Base: RAL9005

Roof Exhaust Vent for Electrical Cabinet 400 x 350 x 120

High quality Italian roof exhaust vent for electrical cabinet.

Vent Filter Grille for Electrical Enclosure 325 x 325 x 42

High quality Italian vent filter grille for electrical enclosures. Designed for easy front access maintenance for fast filter mat cleaning and replacement.