Weidmuller UPS Control ConnectPower 24V DC 20 Amp / 10 Amp

Brand: Weidmuller

Product Code: 1370050010

Availability:2 In stock

516.87

$516.87 inc. GST

$469.88 + DeliveryTo calculate delivery cost, add this item to your cart and enter your shipping address at Checkout. Shipping FAQ

Qty

Ask about this productAsk about this product

CP DC UPS 24V 20A/10A UPS Control Unit - Weidmuller

Dimensions and Weights  
Width 66 mm
Width (inches) 2.598 inch
Height 130 mm
Height (inches) 5.118 inch
Depth 150 mm
Depth (inches) 5.905 inch
Net weight 1,146 g
Temperatures  
Humidity 5...95 %, no condensation
Operating temperature, max. 70 °C
Operating temperature, min. -25 °C
Storage temperature, max. 85 °C
Storage temperature, min. -40 °C
Operating temperature -25 °C...70 °C
Storage temperature -40 °C...85 °C
Battery Module  
Parallel connection option Yes, max. 2
Rated voltage 24 V
Storage medium 1.3 Ah, 3.4 Ah, 7.2 Ah, 12 Ah, 17 Ah, Selectable with rotary switch
Integrated Battery Charger  
Battery availability test every minute
Charging current 0.15 CA
Charging feature IU characteristic curve
Charging voltage (temperature compensated) 27, 48 V @ 20°C
Temperature coefficient - 48 mV / °C
Operating Interfaces and Control Inputs  
DIP switch Inversion of transistor outputs, Operation without temperature probe
Output current selector switch 20 A, 10 A
Remote disconnection (Interlock) Yes
Selector switch battery 1.3 Ah, 3.4 Ah, 7.2 Ah, 12 Ah, 17 Ah, No Battery, Service
Selector switch buffer times 0.5 min, 1 min, 3 min, 5 min, 10 min, 20 min, 30 min, 45 min, ∞, ∞ w/0
Temperature probe NTC 100 kΩ
Input  
DC current consumption max. 200 mA (without battery), max. 0.5 A (with fully charged battery)
DC input voltage range 20...30 V DC
Input current ≤ 13A (for 10A), ≤ 23A (for 20A)
Input fuse (internal) Yes
Max. approved input current 28 A
Rated input voltage 24 V DC
Wire connection method Screw connection
Output  
Continous output current @ UNominal 24 A @ 45 °C, 20 A @ 60 °C, 15 A @ 70 °C
Nominal output current for Unom 20 A @ 60 °C
Output current, max. 24 A
Output voltage Vo = Vin - 0.2 V normal operation (Imax), Vo = Vin - 0.3 V battery supply (I max)
Overload protection Yes
Parallel connection option Yes, max. 2, Yes, with diode module
Protection against inverse voltage Yes
Rated output voltage 24 V DC ± 1 %
Reserve capacity @ UNominal 24 A for 1 min, ED = 5 %
Residual ripple, breaking spikes < 50 mVPP @ 24 V DC, IN
Temperature coefficient - 48 mV / °C
Temperature probe NTC 100 kΩ
Wire connection method Screw connection
General Data  
Buffer times Depending on the connected battery
Clip-in foot metal
Current limiting > 120% IN
Degree of efficiency ≥ 96% normal mode, battery is being charged, ≥ 98% normal mode, battery is charged, ≥ 98% buffer mode
Housing version Metal, corrosion resistant
Humidity 5...95 %, no condensation
MTBF > 500,000 h in accordance with IEC 61709 (SN29500)
Mounting position, installation notice Horizontal on TS35 mounting rail. 50 mm of clearance at top &amp; bottom for air circ. Can mount side by side with no space in between.
Operating temperature -25 °C...70 °C
Power loss < 10 W
Protection against reverse voltages from the load 32…34 V DC
Protection degree IP20
Short-circuit protection Yes
Storage medium 1.3 Ah, 3.4 Ah, 7.2 Ah, 12 Ah, 17 Ah, Selectable with rotary switch
Surge voltage category III
Approvals  
Institute (GERMLLOYD) icon
Certificate No. (GERMLLOYD) 61934-14
Institute (cULus) icon
Certificate no. (cULus) E258476