Network Switch Managed, Ethernet 5 x RJ45, 3 x SC Multi-mode - Weidmuller IE-SW-VL08MT-5TX-3SC
The Value Line from Weidmüller consists of unmanaged and managed switches in a high-quality IP 30 protected metal housing. The equipment can be delivered with Fast Ethernet and Gigabit Ethernet ports. Value Line managed switches support a variety of helpful management functions, such as fast ring redundancy, port-based VLAN, QoS, RMON, bandwidth management, port mirroring and error notification via e-mail or a relay. The ring redundancy can be simply set via the web based management interface, or with a dip switch found on the top of the switch.
Unmanaged Plug & Play switches in a high-quality metal housing (IP 30)
Price-conscious middle-range
Managed switches for the entry into a configurable network infrastructure
Approvals: CE, FCC, cULus, Class I Div. 2 / ATEX, DNV / GL
Product Specifications
Power Supply
Connection type
1 removable 6-pin terminal block
Current consumption
0.32 A bei 24 V
Overload current protection
Existing
Reverse polarity protection
Available
Supply voltage
24 V DC, 2 redundant inputs
Supply voltage, max
45 V DC
Supply voltage, min.
12 V DC
Technology
Flow control
IEEE 802.3x flow control, Back pressure flow control
IEEE 802.3 for 10BaseT, IEEE 802.3u for 100BaseT(X) und 100BaseFX, IEEE 802.3x for flow control, IEEE 802.1D-2004 for the Spanning Tree protocol, IEEE 802.1w for Rapid STP, IEEE 802.1p for Class of Service, IEEE 802.1Q for VLAN tagging
Switch Characteristics
IGMP-Groups
256
MAC table size
8 K
Max. number of available VLANs
64
Packet buffer size
1 Mbit
Priority queues
4
VLAN-ID max
4,094
VLAN-ID min
1
EMC Conformity and Approvals
EMC standards
EN 55032, EN 55024, CISPR 32, FCC Part 15 Subpart B Class A, IEC 61000-4-2 ESD: Contact: 6 kV; Air: 8 kV, IEC 61000-4-3 RS: 80 MHz to 1 GHz: 20 V/m, IEC 61000-4-4 EFT: Power: 2 kV; Signal: 1 kV, IEC 61000-4-5 Surge: Power: 2 kV; Signal: 2 kV, IEC 61000-4-6 CS: 10 V, IEC 61000-4-8
