Weidmuller Power Supply PROtop 48V 480W 10 Amp

Brand: Weidmuller

Product Code: 2467030000

Availability: Order In Check Lead time Typically 3-5 Days.
Please Contact Us for the exact availability and lead time.

583.51

$583.51 inc. GST

$530.46 + DeliveryTo calculate delivery cost, add this item to your cart and enter your shipping address at Checkout. Shipping FAQ

Qty

Ask about this productAsk about this product

PRO TOP1 480W 48V 10A Switch-Mode Power Supply Unit - Weidmuller

High-end power supplies must perform efficiently and reliably, even in challenging industrial environments. This requires high power reserves, a long service life and optimal protection against overvoltage, vibration and extreme temperature conditions. New DCL technology gives PROtop an outstanding dynamic range. This can be used for the reliable triggering of circuit breakers or for powerful motor starts.

Product Specifications

AC input voltage range 85…277 V AC
Connection system PUSH IN
DC input voltage range 80 ... 410 V DC
Dielectric strength max. 300 V AC ≤ 15 s
Frequency range AC 45…65 Hz
Input fuse (internal) Yes
Inrush current max. 5 A
Power factor input > 0.9
Rated input voltage 100 - 240 V AC / 120 - 340 V DC
Surge protection Varistor
DCL - peak load reserve 150 % (5 s); 500 % (15 ms)
Connection system PUSH IN
Mains failure bridge-over time > 20 ms @ 115V AC/ 230 VAC
Output power 480 W
Output voltage 48 V
Output voltage 45...56 V
Parallel connection option Passive Current Sharing
Protection against inverse voltage Yes
Ramp-up time ≤ 100 ms
Rated (nominal) output current @ UNom 10 A @ 60 °C
Rated output voltage 48 V DC ± 1 %
Reserve capacity @ URated 130% permanent at ≤ 40°C
Residual ripple, breaking spikes < 50 mVss @ UNenn, Full Load
Triggerable circuit breakers C2, C4, B6
C failure bridging time @ INom > 20 ms @ 230 V AC / > 20 ms @ 115 V AC
Degree of efficiency 93%
Derating > 60°C (2.5% / 1°C)
Earth leakage current, max. 3.5 mA
Housing version Metal, corrosion resistant
MTBF > 1.000.000 h according IEC 1709 (SN29500)
Mounting position, installation notice Horizontal on DIN rail TS 35, top and bottom 50 mm clearance for free air flow, 10 mm clearance to neighbouring active subassemblies with full load, 5 mm with passive neighbouring subassemblies, direct row mounting with 90% rated load
Operating temperature -25 °C...70 °C
Power factor (approx.) > 0.90 @ 230 V AC
Power loss, idling 10 W
Power loss, nominal load 36.1 W
Protection degree IP20
Series switching capability Yes
Short-circuit protection Yes, internal
Surge voltage category III