Weidmuller Power Supply PROtop 24V 72W 3 Amp

Brand: Weidmuller

Product Code: 2466850000

Availability:1 In stock

199.93

$199.93 inc. GST

$181.75 + DeliveryTo calculate delivery cost, add this item to your cart and enter your shipping address at Checkout. Shipping FAQ

Qty

Ask about this productAsk about this product

PRO TOP1 72W 24V 3A Switch-Mode Power Supply Unit - Weidmuller

High-end power supplies must perform efficiently and reliably, even in challenging industrial environments. This requires high power reserves, a long service life and optimal protection against overvoltage, vibration and extreme temperature conditions. New DCL technology gives PROtop an outstanding dynamic range. This can be used for the reliable triggering of circuit breakers or for powerful motor starts.

Product Specifications

Input  
AC input voltage range 85…277 V AC
Connection system PUSH IN with actuator
DC input voltage range 80 ... 410 V DC
Dielectric strength max. 300 V AC ≤ 15 s
Frequency range AC 45…65 Hz
Input fuse (internal) Yes
Inrush current max. 5 A
Power factor input > 0.9
Rated input voltage 100 - 240 V AC / 120 - 340 V DC
Surge protection Varistor
Output  
DCL - peak load reserve 150 % (5 s); 400 % (15 ms)
Connection system PUSH IN with actuator
Mains failure bridge-over time > 20 ms @ 115V AC/ 230 VAC
Output power 72 W
Output voltage 24 V
Output voltage 22.5...29 V
Parallel connection option Passive Current Sharing
Protection against inverse voltage Yes
Ramp-up time ≤ 100 ms
Rated (nominal) output current @ UNom 3 A @ 60 °C
Rated output voltage 24 V DC ± 1 %
Reserve capacity @ URated 130% permanent at ≤ 40°C
Residual ripple, breaking spikes < 50 mVss @ UNenn, Full Load
Triggerable circuit breakers B2
General Data  
AC failure bridging time @ INom > 20 ms @ 230 V AC / > 20 ms @ 115 V AC
Degree of efficiency 89%
Derating > 60°C (2.5% / 1°C)
Earth leakage current, max. 3.5 mA
Housing version Metal, corrosion resistant
MTBF > 1.000.000 h according IEC 1709 (SN29500)
Mounting position, installation notice Horizontal on DIN rail TS 35, top and bottom 50 mm clearance for free air flow, 10 mm clearance to neighbouring active subassemblies with full load, 5 mm with passive neighbouring subassemblies, direct row mounting with 90% rated load
Operating temperature -25 °C...70 °C
Power factor (approx.) > 0.90 @ 230 V AC
Power loss, idling 5 W
Power loss, nominal load 8.9 W
Protection degree IP20
Series switching capability Yes
Short-circuit protection Yes, internal
Surge voltage category III
Approvals  
ROHS Conform