IP55 Electrical Enclosure - Powder-Coated Steel
Features and Specifications
Protection: Complies with IP55 IK10, NEMA 4 (Independent accredited test laboratory).
Electrical Enclosure Standard: IEC 62208, IEC/EN/AS60529, (UL508A Optional).
Conforming and certified to IEC 62208 Empty enclosures for low voltage switch gear and control gear assemblies.
Body: 1.5mm galvanised steel sheet
Gland Plate: 1.5mm galvanised steel sheet
Door: 1.5mm galvanised steel sheet
Device Mounting Plate: 1.5mm galvanised steel sheet
Powder-coated RAL7035 (Other colours available upon request)
The robust monoblock body is 1.5mm galvanised steel sheet. Precision automated manufacturing equipment ensures accuracy and consistent high quality. Flat face sealing surfaces increase seal life. Pre-fitted blind threaded inserts for mounting brackets and accessories removes the need for drilling. This retains the integrity of the IP rating. Integral device plate mounts and M6 earth stud are included. A galvanised steel gland plate is also incorporated into the bottom face.
Enclosure Double Doors:
The surface mounted doors are fabricated using 1.5mm galvanised steel sheet. They incorporate concealed removable hinges with captive pins. The doors are designed to eliminate the central mullion to improve accessibility into the enclosure. Doors are designed for a 110° opening. Each door contains integral cable management rail studs and M6 earth studs. The cable management rails are removable to provide more space for control components.
A high quality full perimeter seal provides excellent sealing over a long life. It is machine applied Polyurethane foamed in place (FIP).
3-point locking system with key-lock swing handle.
Device Mounting Plate:
The device mounting plate is 1.5mm galvanised steel sheet. It is pressed to provide strength. It is pre-fitted into the enclosure as standard.
Gland plates are incorporated into the bottom face of the enclosure for cable management. They are provided with gaskets and fasteners. The size and quantity vary according to enclosure size.
UL approved epoxy polyester powder-coated with a textured finish. 80-120 micron average thickness. The standard electrical enclosure colour is RAL7035.