Brand: IP Enclosures

Product Code: IP-1208040

Availability:Not in StockCheck Lead time

$620.00

$682.00 inc. GST

620.00

Qty

Ask about this productAsk about this product

Downloads

Data Sheet
Drawing
.dwg

 

IP66 Steel Enclosures

The S1 range consists of powder-coated galvanised steel, single door, wall-mounted electrical enclosures. They are suitable for heavy duty applications.

Features & Specifications

Protection: Complies with IP66 IK10, NEMA 4 (Independent accredited test laboratory).

Electrical Enclosure Standard: IEC/EN/AS62208, IEC/EN/AS60529, (UL508A Optional).

Conforming and certified to AS/NZ 62208 – 2006 ‘Empty enclosures for low voltage switch gear and control gear assemblies’.
(Complying to new standard AS/NZ 61439 – 2016 ‘Low voltage switch gear and control gear assemblies’ as empty enclosure in accordance to AS/NZ 62208.)

Material:

  • Body: 1.2mm galvanised steel sheet (up to 700x500x250) 1.5mm galvanised steel sheet (800x600x200 and above)
  • Gland Plate: 1.5mm galvanised steel sheet
  • Door: 1.5mm galvanised steel sheet
  • Device Mounting Plate: 1.5mm galvanised steel sheet
  • Seal: Polyurethane

Enclosure Body:

The robust monoblock body is galvanised steel sheet (1.2mm-1.5mm). Precision automated manufacturing equipment ensures accuracy and consistent high quality. Flat face sealing surfaces increase seal life. Pre-fitted blind nutserts for mounting brackets and accessories removes the need for drilling. This retains the integrity of the IP rating. Integral device plate mounts and M6 earth stud are included. A galvanised steel gland plate is also incorporated into the bottom face.

Enclosure Door:

The surface mounted door is 1.5mm galvanised steel sheet. It incorporates concealed removable hinges with captive pins. Doors are also designed for a 110° opening. Each door contains integral cable management rail studs and an M6 earth stud. The cable management rails are removable to provide more space for control components.

Enclosure Seal:

A high quality full perimeter seal provides excellent sealing over a long life. It is machine applied Polyurethane foamed in place (FIP).

Enclosure Lock:

A full range of locking solutions are available upon request.
– Steel enclosures <1000mm high have 3mm double bit insert quarter turn lock with key.
– Enclosures >1000mm high have 3 point locking system with key-lock swing handle.

Device Mounting Plate:

The device mounting plate is 1.5mm galvanised steel sheet. It is pressed to provide strength. It is pre-fitted into the enclosure as standard.

Gland Plate:

Gland plates are incorporated into the bottom face of the enclosure for cable management. They are provided with gaskets and fasteners. The size and quantity vary according to enclosure size.

Surface Treatment:

UL approved epoxy polyester powder-coated with a textured finish. 80-120 micron average thickness. The standard electrical enclosure colour is RAL7035. A full range of other colour options are available upon request. Refer to Electrical Enclosure Colours.